Mola Demi : No Test Images .....Because?
So it was a good time as any to make my purchase. I was going to have the June blog about these 2, showing sample images and my impressions and images from my test, that, of course, will have to be another day,
Last month, I introduced two new pieces of gear into my setup: the Elinchrom RX battery pack with “A: head and the long-awaited Mola Demi (White) beauty dish. I’ve wanted the Mola beauty dish for some time, and B&H Photo had it on sale for $278, so I took the opportunity to make my purchase. I was planning to write the June blog about these two items, sharing test images and my impressions as I integrated them into my workflow. However, that will have to wait for another day. The Mola Demi I received was unfortunately extremely flawed, but this wasn’t something B&H Photo or the good folks at Promarks/Mola offices could have foreseen; it was a tooling issue from the factory. Here’s the breakdown of the assembly: there are eight holes drilled in the rear of the Mola Demi—four for mounting a plate that holds the speed ring in place, and four for the diffuser plate inside the Demi.
I was going to write the June blog about these 2, showing test images and my impressions as I introduced this to my workflow, that, of course, turned out to be for another day.
The Mola Demi I received was, unfortunately, extremely flawed; this was by no means a problem that B&H Photo could have foreseen, nor any of the good folks at Promark’s/Mola offices. This was a tooling issue from the factory. Here’s the breakdown for assembly. There are eight holes drilled at the rear of the Mola Demi. 4 holes are to mount a plate that holds the speed ring in place, and the other four holes are for the diffuser plate held in place on the inside of the Demi.
As I started assembling the Demi, I noticed that 3 of the eight holes did not align with the mounting plate. I tried different orientations for the plate—45 degrees and 90 degrees—but each time, the same issue occurred: the holes were at least 1/8 inch away from the center.
At this point, I am admitting defeat and trying to keep my frustration in check. I locate the go-to person through the Mola website—Herb Pletcher—to discuss a very obvious quality control issue. First, I email Herb, and shortly afterward, we speak by phone. After several attempts to make this work, we finally conclude that there are only two options left: 1. drill new holes to accommodate the holes that are 1/8 of an inch off, or 2. return it for an exchange with B&H Photo. Of course, I went with option 2. I was planning to write a June blog about the Elinchrom RX and the Demi, but that will have to wait another day (sigh). Now, I wait for it to arrive again.
Here is the contact info if you have purchased a Mola beauty dish and encounter an issue. Herb Pletcher email: herb.pletcher@promarkbrands.com
New Gear : Elinchrom RX & Mola Demi
With all photo projects on hold, it gave me some time to rethink some of the photo tools at my disposal, and to get rid of what I didn’t need or wasn’t using enough of and bring in some much needed new gear.
With all photo projects on hold, it gave me some time to rethink some of the photo tools at my disposal, and to get rid of what I didn’t need or wasn’t using enough of and bring in some much needed new gear.
The first new arrival was a “22 Mola Demi beauty dish (white) from B&H Photo in New York. It arrived about a week or so before the start of this blog. I wanted to replace my 17” silver Elinchrom beauty dish, which I decided to keep; just in case I need to add a little crispness to my images. I engaged renowned fashion photographer Melissa Rodwell in an earlier offer she made about helping me purchase a Mola Beauty dish and based on a photoshoot she did with the Demi (the video can be seen below) it made my decision that much easier to make my purchase.
**Though the video above shows content by Melissa Rodwell and her team, the YouTube channel it appears on is not affiliated with her brand.
The 2nd and last piece of new gear to arrive was an Elinchrom RX Speed AS (kit) This battery-powered system rates at 1100 ws of power, more than enough to overpower the sun. I fell in love with the Elinchrom system a few years ago when I sold off my Paul C Buff lights in place of something more portable and lighter, I bought the Elinchrom Quadra Hybrid and the Quadra RX soon after, and love them. So why the decision to get the RX? Well, it wasn’t that tough of a choice. Before the purchase of the RX, I was using an older Elinchrom monolight with my Quadra set up; the Elinchrom EL-1000. I still had my old Paul C Buff battery pack, the Vagabond II, minus the battery, which I was going to sell (still am) and take those funds to get another Quadra, As it goes, I saw the RX was listed at a steal with B&H Photo in New York. Here’s the link:
https://www.bhphotovideo.com/c/product/532562-REG/Elinchrom_EL_10287_Ranger_RX_Speed_AS.html
“Elinchrom Ranger RX Speed AS Asymmetrical Battery Powered Pack This is the Elinchrom Ranger RX Speed AS Asymmetrical Battery Powered Pack. The “RX” signifies the ability to be fired by a remote control handset, or computer. The “AS” indicates the ability of the 1100Ws power pack to divide power to each of 2 heads asymmetrically.”
I would like to thank Melissa for her friendship and for being so approachable, it’s photographers such as her that makes me want to do more as a photographer., to explore and experiment outside my comfort zone. I’ve spent so much time on the road shooting events, I almost forgot what it was like to actually create something,.
You can see Melissa Rodwell’s amazing work at her web site, as well as in her Magazine ALICE. where she and her sensational team put out some amazing content.
Helpful links of these brands :